Some Audi models use different front control arm designs depending on the vehicle's production date. These components were updated during the production run, so selecting the correct control arms requires verifying which version your vehicle was originally equipped with.
The easiest way to determine the correct parts is by checking your vehicle's build date. The primary differences between the earlier and later designs include:
- Hydraulic bushing size: Available in approximately 65mm or 75mm diameters
- Ball joint thread size: Available in M12 or M14 configurations
To confirm fitment, you can decode your vehicle's build date using your VIN or compare the part numbers stamped on the control arms currently installed on your vehicle.
If you're unsure which version you need, our Technical Support team can help verify the correct parts using your vehicle information.
To start shopping for suspension parts for your vehicle, head over to Fcpeuro.com and enter your vehicle information into the fitment selector.